Masking is what happens when two elements occupy the same frequencies at the same time. It is not a volume problem, and it cannot be solved by turning something up. The element being masked is already as loud as it can be without dominating, and the element doing the masking is already as quiet as it can be while remaining present. Both levels are correct, and the result is still a problem.
How masking actually works
Your ear cannot separate two sounds that occupy the same frequencies at the same time. It does not hear the louder one and then the quieter one. It hears a single blended sound that carries the characteristics of both, with the quieter one partially or completely obscured.
The consequence is that a masked element does not sound quieter. It sounds like it is not there, or like it is there but with some quality missing. This is why level automation on the masked element often does not help. Raising it makes the masking element louder too, and the blend simply shifts without resolving.
Finding what is being masked
The useful test is to solo the suspected victim. If you can hear it clearly on its own but it disappears in the mix, something is masking it. If you cannot hear it clearly on its own, the problem is in the element itself rather than in the arrangement.
A second test is to move the two elements apart in frequency and listen. If the masked element becomes audible, you have found the conflict. This is diagnostic rather than corrective, since you will not usually keep the move, but it confirms the cause in a few seconds.
How to actually solve it
The most effective solutions all involve removing content rather than repositioning it. The masked element needs a gap to be heard in, and the gap has to come from somewhere.
Cutting a frequency range from the masking element is the standard approach and works when the conflict is broadband. If the mask is a specific frequency, a narrow cut there opens the space. If the mask is a dense midrange pad, then the pad needs a notch rather than a cut, and the notch should be as wide as the masked element requires.
Arranging the elements so they do not coincide is better still, and this means moving things out of the way in the arrangement rather than processing them afterwards. A vocal line that rises into a pad region should either be given clearance by the pad or be revoiced to avoid it.
Working through a masking problem
Solo the masked element. If it is clear alone and absent in the mix, you have found the conflict. If it is unclear alone, stop and fix the element.
Identify the masking element by soloing the other parts. Remove them one at a time. Usually you will find it within two or three attempts.
Decide which one should own the space. This is the decision that matters. Two elements cannot both occupy the centre, so one of them has to yield, and the choice is musical rather than technical.
Make the masker's reduction, not the victim's boost. Cut a notch in the masking element wide enough to fit the victim. Check it on headphones as well, because masking behaves differently at close and distant listening positions.
Masking causes and their fixes
| Cause | Symptom | Fix |
|---|---|---|
| Dense pad vs vocal | Vocal loses intelligibility | Notch the pad at vocal frequencies |
| Bass vs kick | Low end sounds thick and unstable | Assign frequencies to each element |
| Overheads vs bass | Bass lacks definition | High-pass the overheads |
| Two competing leads | Neither melody is clear | Arrange them, do not process them |
| Wide pad vs acoustic | Acoustic sounds thin | Narrow the pad, fix the panning |
Density as an arrangement choice
Dense mixes are not wrong. They are a stylistic choice, and a dense mix that is executed deliberately can be more impressive than a sparse one. The problem is density arrived at by adding elements without deciding what each one contributes.
Every element in an arrangement should be earning its place by doing something the others do not. If a second guitar plays the same line as the first, it is adding width at best and mud at worst. If it plays a different part, the arrangement is denser and more interesting, and the two will not mask each other because they are not in the same place.
Retuning and density
A retune moves all fundamentals down, which tightens the spacing between elements and therefore makes masking slightly more likely in the low-mid. Any arrangement that was dense at the edge of working will cross that edge after a retune with 432Hz MASTER.
With RASTA 528Hz, where intervals are redistributed rather than lowered, the overlaps between instruments can change substantially, so a previously clear arrangement may need genuine re-evaluation rather than a small adjustment.
The bottom line
When something disappears in a mix, the answer is almost never to make it louder. Find what is occupying its space, decide which element should keep it, and remove the other.
Frequently asked questions
What is frequency masking in mixing?
It is what happens when two elements occupy the same frequencies at the same time, so the ear perceives a blend rather than two separate sounds. The masked element does not sound quieter, it sounds absent or incomplete, which is why raising its level does not fix it.
How do I find what is masking my vocal?
Solo the vocal. If it is clear on its own and absent in the mix, something is masking it. Then remove the other elements one at a time until you hear it appear. Usually the culprit is a pad, a guitar or a wide synth.
Should I boost the quiet element or cut the loud one?
Cut the masking element, and cut it as a notch wide enough to fit the element you want to reveal. Boosting the quiet element raises the masking element too, because they share frequencies, so the blend shifts without resolving.
Does retuning make masking worse?
Slightly. All fundamentals move down, so elements sit closer together and the low-mid has less headroom. An arrangement that was dense but working will cross the edge. With Solfeggio retuning the relationships change more substantially, so a full recheck is warranted.