Delay is the most rhythmically useful effect in mixing, and the most frequently set by ear without reference to tempo. A delay that is not related to the tempo in some way reads as a loose doubling rather than as part of the arrangement, however good it sounds in isolation.

Why tempo placement works

A listener does not hear a delay in isolation. They hear a delay in relation to the beat. When the repeat lands on a subdivision, the two are heard as one rhythmic event and the repeat reinforces the pulse. When the repeat lands between beats, it is heard as a separate event and adds motion.

The difference between those two outcomes is entirely the timing, and the timing is entirely determined by the tempo. This is why a delay that was perfect at 120bpm can sound wrong at 128bpm even though nothing about the delay setting was changed.

The two main placements

Slapback is a short delay, usually around 60 to 120 milliseconds, with the mix high-passed. It thickens a vocal without being perceived as a separate event, because it arrives early enough to be heard as part of the same sound and short enough that it is not mistaken for a distinct note. It is the standard choice for a lead vocal that needs presence without taking up rhythmic space.

Rhythmic delay is a longer delay, typically a dotted eighth, used deliberately as part of the arrangement. The first repeat becomes a rhythmic element in its own right, and the vocal melody is extended into a pattern. This is a production decision rather than a mixing one, and it changes how the vocal functions in the track.

The maths, briefly

A quarter note at 120bpm is 500 milliseconds. A dotted eighth is 375ms, an eighth is 250ms, and a sixteenth is 125ms. At any other tempo these values scale proportionally, and most DAWs will calculate them from the project tempo if you ask them to.

The reason to know the numbers rather than relying on the tempo is that dotted eighths are not always where people expect. At some tempos, particularly slower ones, a dotted eighth produces a repeat that arrives later than feels natural, and a straight sixteenth or a triplet is the better choice.

Setting a delay properly

1

Set the delay time from the tempo, not by ear. Choose the rhythmic relationship you want first, then let the tempo give you the milliseconds.

2

High-pass the repeats. Every repeat is a new source of low-mid content, and without a filter the delay muddies exactly the region the mix is tightest in. Somewhere above 200 to 300Hz is a sensible starting point.

3

Automate the delay level, not the time. The repeats should be present where the vocal needs support and absent where it does not. A delay that is always on becomes part of the texture and stops being noticeable as a decision.

4

Check that repeats do not fill gaps you want empty. A repeat arriving in a rest fills that rest, which can be exactly right or exactly wrong depending on what the rest is for.

Common delay placements

PlacementTime at 120bpmCharacter
Slapback60 to 120msThickens, barely perceived as an event
Sixteenth note125msBusy, doubles the rhythmic density
Eighth note250msObvious, adds motion between beats
Dotted eighth375msMelodic, extends the phrase
Quarter note500msStrongly rhythmic, requires care

Retuning and effect timing

Delay time is expressed in milliseconds, so a retune does not change it. What a retune changes is what the delay repeats. Each repeat is a copy of the source material, and after retuning with 432Hz MASTER those copies carry the new tuning, which is what you want.

The more useful observation is that a denser low end means repeats carry more low-mid weight, and the high-pass on the delay return matters more after a retune than it did before. This is a common small improvement that costs nothing.

The bottom line

Delay is an arrangement element, not a finishing touch. Set the timing from the tempo, filter the repeats, and automate their presence.

Frequently asked questions

What is a dotted eighth delay?

A delay set to 1.5 times an eighth note, which places the repeat between the second and third eighth of a beat. At 120bpm that is 375 milliseconds. It is a common melodic placement because the repeat extends the phrase without landing directly on another beat.

Should I high-pass a delay return?

Yes, almost always. Every repeat adds low-mid energy to the mix, and without a filter the delay fills in the exact region the mix is tightest in. A cut somewhere above 200 to 300Hz is a reasonable starting point.

Does retuning change delay timing?

No. Delay times are in milliseconds and a retune does not affect them, so the rhythmic placement you set stays intact. What changes is the content of each repeat, which will carry the new tuning.

Should delay be automated?

Usually yes. Automating the delay level, rather than the time, lets the repeats be present where the vocal needs support and absent where it does not. A permanently audible delay becomes part of the texture and stops reading as a decision.

More from the atixUniverse blog